• 2190 Adams Rite Interconnected deadbolt-deadlatch

*Actual product and finish may vary

2190 Adams Rite Dual Force Interconnected deadbolt-deadlatch for aluminum storefront doors

Dual Force 2190 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam. Cylinders with MS® cams
can be readily obtained from most cylinder manufacturers.

Description: The Dual Force® 2190 Interconnected Deadbolt/Deadlatch provides access control and security for aluminum stile doors. Latch and deadbolt capabilities are combined for fast, easy, and panic-proof exiting.

Function: The Dual Force 2190 combines the access control capabilities of a latch with the security of a deadbolt. The key retracts and extends the deadbolt (and deadlatch) from either side. The exterior lever retracts the latch only, while the inside lever retracts the deadbolt and latch simultaneously for fast, easy, panic-proof exiting. Intended for out-swinging doors.

Operation: Key or thumbturn retracts or extends deadbolt or deadlatch. Inside lever retracts both when configured with interconnect feature. Outside lever retracts latch only. Latch holdback feature activated or deactivated by turning key to retract latch and sliding holdback button on faceplate down to hold and up to release. 2190 will not work without its specially designed strike - included standard in package.

Specifications
INTER-CONNECTION: Field-selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult local building
officials for guidance in code compliance. Retrofits to existing
MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same
backset. 1-3/4" minimum door thickness required.
CYLINDER BASKET: 1-1/8" or 1-1/2" only.

LATCHBOLT/DEADBOLT: Latchbolt: 5/8" throw of solid brass.
Easily reversible using only a screwdriver. Deadbolt: 1" throw of
stainless steel.

AUXILIARY DEADLATCH PIN: Stainless steel. Deadlocks latchbolt to

prevent “loiding” or case-knife entry.


FACEPLATES: Measures 1" x 6-7/8". Include FaceStyle faceplate system
that adapts to flat, radius, or beveled door edge. Radius with
weatherseal faceplate available separately.

STRIKES: Standard strike furnished is the 2101-01 for flat jamb where
door closes flush or nearly flush. The 2101 covers MS®
Deadlock strike preparation with modification, and the 4901
Deadlatch strike directly. Also available in radius version for
opposite stile pairs of doors and with extended lip strikes for
special jamb conditions.

CYLINDER CAM: The Dual Force 2190 is operable by any standard 1-5/32"
diameter mortise cylinder with MS® cam dimensioned as
shown. Cylinders with MS® cams can be readily obtained from
most cylinder manufacturers.

OPTIONS: Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2290 for wood or steel door
version for stile and rail type door construction. Note that the
low profile trim (trim option 3) is recommended for in-swing
door applications. Please refer to 3080 (TRIM) for full offering
of designer handle sets.

ELECTRIFIED TRIM OPTIONS: Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
|
STANDARD PACK AGE: Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately.
Shipping Weight: 3 lbs.



2190 Adams Rite Interconnected deadbolt-deadlatch

  • $160.00


Available Options