*Actual product and finish may vary
VSIG 24 x 30 Air Louvers Slimline-IG Vision Lite bronze.
Low Profile Beveled IG Vision Lite for Fire Rated Doors.
Glazing: 5/16" to 1" Thickness.
Material: 20 gauge CRS frame. Door:
UL Listing: 1” to 3” door
Order Size & Cut-Out Size 24” x 30”
Glass Order Size 23” x 29” x 1” (Not included)
Material: 20 gauge CRS frame.
Minimum size 3" x 3”, maximum size 60” x 104”. See fire rating below.
Construction: 1-1/4” trim with radius corners, mitered and welded.
Continuous glass retainer, countersunk mounting holes in the bevel on non-corridor side.
Door: UL Listing: 1” to 3” door or WHI Listing: 1-3/4” door. For other sizes, see VLFIG and VLFEZIG.
Fasteners: #8 x 1" flathead phillips SMS to match finish.
Glass: Glass: UL Listing: 5/16” to 1-11/16” or WHI Listing: 5/16"-1" - glazing to be ordered separately from Glazing Section. Use fire rated glazing with UL classification or Warnock Hersey (WHI) markings for fire rated applications. Visible light is 2" under rough opening size. Glass size is 1" under order size.
Fire-Rated Air Louvers Glazing to fit this vision frame: KFRL, KFRU, CONTRA45, CONTRA60, ARMRSHIELD, LGSHIELD.
Fire-Rating, Testing & Listings: When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure. See detailed installation instructions. UBC 7-2 Installation: See detailed installation instructions.
VSIG 24 x 30 Air Louvers slimline-IG vision lite - bronze
- Brand: Air Louvers
- Product Code: VSIG 2430B