*Actual product and finish may vary
The BEA 10TD433PB3V is a 433MHz One-button Digital Transmitter wired with 3 volt battery that is ideal for the wireless activation and/or sequencing of automatic doors.
A wide variety of transmitters are available including one to four button handheld or 'push plate' styles. BEA transmitters are compatible with all automatic door 'remote' applications.
A unique rolling code is transmitted each time the transmitter is activated (thus providing a secure signal). Since receivers can be individually programmed, multiple receivers can be programmed differently thus allowing for sequencing in multiple applications. Those receivers programmed with NO DELAY will active immediately upon receiving the transmitter signal. Those receivers programmed with a DELAY will activate at the end of their pre-determined time delay set by the potentiometer. The use of multiple receivers will allow for the uninterrupted pace or hands free operations through a pair of doors upon initial activation.
-Operates with a unique rolling code each time the switch is activated
-Up to 4 separate wireless Receivers can be activated by a single Transmitter (i.e. 4-Button)
-Red LED indicator on Transmitter confirms transmission and battery life
-3-Volt Battery Power
433 MHz Extended Hold (EH) version: The transmitters used in conjunction with an Extended Hold (EH) receiver, once depressed and held, are designed to hold the door open until the transmitter button is released. Once released the 'EH' receiver will begin its no delay or predetermined delay time countdown sequence and allow the
door to close.
-Input Voltage: 3 Volt Battery
-Operating Frequency: 433 MHz
10TD433PB3V BEA 433MHZ Digital Transmitter - 3V Battery
- Brand: BEA
- Product Code: 10TD433PB3V