*Actual product and finish may vary
7700EO36 Cal-Royal Type 1, grade 1, Rim Exit Device. Exit Only, 36" exit device. Retrofits Von Duprin 99 & 98 Series using 7700 Escutcheon trim
Meets The Buy American Act
Hurricane Approved Hardware
RIM DEVICES are non-handed and are Easily field reversible.
MODEL ACTUAL LENGTH MAX CUT DOWN DOOR SIZE
7700EO36 32” 6” 30” to 36” door width
7720EO48 44” 10” 38” to 48” door width
US3 Bright Brass, Clear Coated
US10B Dark Bronze, Oil Rubbed
US32D Satin Stainless Steel (32D is 26D Satin Chrome with 32D Satin Stainless Steel Push Pad)
For Doors – 1 3/4 thick standard optional 2 1/2" thick. 4 1/2" minimum stile width for single or double door application using standard 938 strike and pull or lever, thumbpiece and escutcheon trims. 2-3/4" backset.
Chassis - Nonferrous alloy (Panic Grade), steel (Fire Grade).
Cover - Non-ferrous plated material. Covers stock hollow metal doors with 161 cut out.
Mounting - Furnished with wood and machine screws. Available thru bolts on request. Thru bolts are included and in standard packaging on fire rated devices.
End Cap - Brass, bronze or stainless steel construction.
Alarm - Available. Prefix NALRM before PART#.
Hand - Non-handed, center hub for 2 3/4" backset.
Latch Bolt - Stainless steel ¾" throw with anti-pick feature.
Spring - Stainless steel throughout.
ANSI Standard - A156.3, Grade 1.
Rail Assembly - Heavy gauge extruded aluminum body with stainless steel push pad.
Dogging Feature - Allen-type key furnished standard on non-fire labeled devices.
Mullion - Available.
UL and ULC Listed - 7700 Series for panic.
F7700 series for fire exit hardware for all types of 4' x 8' single doors and 8' x 8' double doors for up to 3 hours fire labeled installations, conforms to standards UL10C and UBC 7-2-1997 codes.
Strike - 938 packed standard.
MUST ORDER CR602RF or CR631RF POWER SUPPLY TO HONOR WARRANTY AND UL MARKING
Our electrified latch pullback exit device allows for remote keyless access control in high occupancy/high traffic conditions where exit devices are required. Common applications include conditions such as hospitals, airports, schools, churches and where they are commonly specified in applications that require automatic door openers. The device may be continuously energized allowing for a push/pull condition if desired.
Available on 9800, 7700 & 2200 Series, including rim, vertical rod, concealed vertical rod, mortise exit device, fire
and non fire-rated devices. - High-performance quality solenoids designed for demanding applications.
The PM200* interface power module (included) is programmed to meet the requirements of the specific exit device
modification. It maximizes the efficiency and life of the solenoid, allows for a much longer wire run and may be
used with 24VDC power supplies rated at 1.5A or greater - Dual coil solenoids, or PWM programming, allow for either momentary or extended time latch retraction.
No hassle 3-Year Warranty
Voltage – 24VDC
Amperage – Surge current – 12A for 200ms@24V / Holding – 250mA@24V
Coil resistance – 3.7 Ohms
To Order, Specify:
Prefix ELR before PART#
ITEM # DESCRIPTION
ELR Electrified Latch Retractor
Signal Switch RX and LX
RX (request to exit) signal switch is used to signal the use of an opening from the push side. When the push pad is depressed, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the touch bar.
LX (latch bolt monitoring) signal switch monitors both egress and access of an opening. When the latch bolt is retracted, the switch is activated. These devices are equipped with an internal SPDT (single pole double throw) switch that monitors the latch bolt position.
LX and RX switches can be combined with EL (electric latch retraction) option.
RX or LX............................... Switch rated 0.5 amperes @ 24VAC/DC resistive
Low current RX or LX........... Switch rated 0.5 amperes @ 24VAC/DC resistive
For Factory Installed:
To Order, Specify:
RX.......................Request to Exit
LX........................ Latch bolt Monitoring
LXRX................... Latch bolt Monitoring/Request to Exit Combination
ITEM # DESCRIPTION
RX Request to Exit switch for field installation.
LX Latch bolt Monitoring switch for field installation.
LXRX Latch bolt Monitoring/Request to Exit Combination
Specify : 7700, 9800 or 2200 after ITEM# when ordering, for example: RX7700 to order RX switch for 7700
series exit devices
7700EO36 Cal-Royal Rim Exit Device, Exit Only, 36"
- Brand: Cal-Royal
- Product Code: 7700EO36