• ESC7700 Cal-Royal Exit Device Trim Classroom w/Cylinder

*Actual product and finish may vary

ESC7700 Cal-Royal Exit Device Trim Classroom w/Cylinder  -  Rigid Entrance, key locks or unlocks escutcheon trim.

Cal-Royal Trim Information

KEYWAY: 6 pin solid brass “C” keyway Mortise Cylinder standard.

KEYWAYS - 6 pin solid brass "C" keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon E, Arrow A, Yale 8, Yale GA

CONSTRUCTION:

Rigid, non clutch mechanism

Double heavy duty spring support to prevent sagging and enhance operation

Grade 1, thru-bolted design. Non-handed design. Easily field reversible

Hardened steel heavy duty tailpiece. Available for fire and non-fire rated rim and vertical rod exit devices

DOOR THICKNESS

Standard 1 3/4” For 2 1/4” thick door use additional part # TAIL3

ESCUTCHEON DIMENSIONS

2 3/4” width X 10 1/4” length. Lever length: 4 3/4”. Fits and

covers 2 1/8” 161 cutout

Electrified Lever Trim

Cal-Royal's electrified lever trim provides remote locking and unlocking capabilities while incorporating the patented clutch trim design. The 24V DC solenoid can be energized from a distant controller, thus allowing access control of the opening. The control of stairwells in high-rise buildings is a common application for this trim, where electric pullback of the exit device's latchbolt is cost prohibitive or not required. This is especially practical in applications where fire/life safety codes require a "fail-safe" condition which is not an option with electrified latch pullback devices. Because the current draw is quite low there is no need for a more expensive power supply to provide the surge current.

Features

Continuous duty solenoids used to insure trouble-free operation - Internally mounted solenoid to ease installation (no special door prep required) No hassle 3-Year Warranty - Requires additional door prep

Options

Available Fail Safe (electrically locked) or Fail Secure (electrically unlocked)

Voltage options - 12V or 24V (AC/DC)

Request to Enter Switch (REE) available

CRU2 - Current Reduction Unit to improve solenoid life in "continuously on" applications

Specifications

Solenoid....................................... Continuous Duty 24VDC

Operating Voltage........................ 12 or 24VAC/DC + OR - 10% (must specify 12 or 24 volts when ordering)

Amperage..................................... 260mA@12V / 160mA@24V

Coil Resistance............................ 12V=49Ω / 24V=159Ω

 

To order, Specify:

OPTIONS: FAIL SAFE (FS)

                FAIL SECURE (FSE)

ITEM #   DESCRIPTION

FS12 ESC22        FS12 FAIL-SAFE OPTION 12V AC/DC

FS24 ESC22        FS24 FAIL-SAFE OPTION 24V AC/DC

FSE12 ESC22      FSE12 FAIL-SECURE OPTION 12V AC/DC

FSE24 ESC22      FSE24 FAIL-SECURE OPTION 24V AC/DC

See Options

ESC7700 Cal-Royal Exit Device Trim Classroom w/Cylinder

  • $96.00


Available Options