• VL2436 Cal-Royal Commercial Door Vision Lite 24" X 36"  Standard Profile

*Actual product and finish may vary

VL2436 Cal-Royal Commercial Door Vision Lite, Door Cutout Size 24" X 36" Standard Profile Vision lite for Fire Rated Door

Cal-Royal Door Lite Information: http://www.cal-royal.com/pdf/vlvisionlitespartnosdescriptions.pdf

Visible Lite is 2" Under Order Size
Glass Size is 1" Under Order Size
45-180 Minute Fire Rated Steel Vision Lites for 3/16" to 1/4" Glass (Glass Optional)

Glass Options:
TEMP (Tempered Glass): Heat-Treated clear safety glass that breaks into small particles if broken.
Light Transmission: Approximately 86%
Thickness: 1/4" (6 mm)
Fire Rating: None. Clear wire free glass recommended for non fire rated applications.
Heat-strengthened glass and cannot be cut after manufacturing.
Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage.
Glazing Tape: Included with Lite Kit and Glass

WS (Superlite I-W Wired Glass): Embedded 3/4" X 3/4" wire mesh.
Light Transmission: Approximately 86%
Thickness: 1/4" (6 mm)
Annealed single glazing with safety film applied to one side.
Fire Rating: 20 minutes to 90 minutes. Install in fire listed and labeled vision frames. 20 ga CRS (Cold Rolled Steel) beveled vision lite, 1/4" wired glass with film.
Glass is UL labeled standard.
Use of glazing compound or glazing tape on both sides of glass is recommended to minimize breakage.
Glazing Tape: Included with Lite Kit and Glass

Standard Profile Vision lite for Fire Rated Door
Frame has Single-side Fasteners
20 Gauge Cold Rolled Steel
Designed for use with 1-3/4" doors only
Baked on powder coat finish
Color: Standard Bronze
Fasteners: #8 x 7/8" Flathead phillips head SMS

VL2436 Cal-Royal Commercial Door Vision Lite 24" X 36" Standard Profile

  • $69.00


Available Options