• CAT01 Cal-Royal Cylindrical Lever Lock Grade1 Entrance

*Actual product and finish may vary

CAT01 Cal-Royal Genesys Heavy Duty Cylindrical Lever Lock with Clutch Grade1 Entrance

Cal-Royal Genesys Information

ENTRANCE LOCK Pushing button in inside lever locks outside lever. Turning inside lever or operating key in outside lever releases button automatically. Closing door does not release button. Button cannot be fixed in lock position. Inside lever always free. Latch bolt automatically deadlocks when door is closed.

MEETS THE BUY AMERICAN ACT

HURRICANE APPROVED HARDWARE

LIFETIME WARRANTY

GENERAL SPECIFICATIONS - Full length 4-3/4" lever handle with 3/8" return on GN and SPA Design. Rose diameter 3-1/2". Key removable outside lever for fast rekeying. Non-handed levers. Concealed mounting screws.

CLUTCH - Free turning handle in the lock position without retracting the latch, to deter breaking of handle.

APPLICATIONS - For offices, schools, hospitals, apartments, hotel/motel, residential, commercial and public buildings.

DOOR RANGES - 1 3/8" to 1 3/4" thickness. 2" to 2 1/4" thickness also available on request.

HOUSING -Cold Rolled Steel and Zinc Dichromate finish for rust resistance with precision cast steel retractor. 2 1/8" diameter bore.

STRIKES -ASA 1 1/4" x 4 7/8" standard. Other strikes available upon request.

Backset: 2 3/4" standard,  2 3/8", 3 3/4" and 5" Optional.

TRIM - Thru-bolted assembly through door with separate spring cage for each lever.

CYLINDER & KEYWAYS - 6 pin solid brass "C" keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon E, Arrow A, Yale 8, Yale GA .  All Cylinders are 6 pin. Finish 26D & US3

ANSI STANDARDS - Meets or exceeds BHMA/ANSI A 156.2 Series 4000, grade 1 requirements. Exceeds 800,000 cycles.

LATCH OPTIONS - 2 3/4" standard, brass with 1/2" throw. 2 3/8", 3 3/4" and 5" backset optional. GND750 deadlatch reversible for flat and beveled door. 3/4" throw anti-friction deadlatch for pair of fire doors.

LATCH FACEPLATE - Standard 2 1/4" x 1 1/8" for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset.

 

CAT01 Cal-Royal Cylindrical Lever Lock Grade1 Entrance

  • $104.00


Available Options