• 7110-510-652-00 Adams Rite Electric Strike, 24VDC, 17mA

*Actual product and finish may vary

Adams Rite 7110-510-652-00 is a 24VDC, 17mA, Fail safe or Fail secure Field Reversible Electric Strike for use with AR Deadlatches or Cylindrical Latches.

Faceplate Length 7-15/16”

DC Continuous or Intermittent

For Wood Jambs (equal to 7810)

ANSI/BHMA Type E09321 (Grade 1)


Case

Approx. 1” x 3-3/8” x 1-5/8” deep.  Zinc-aluminum alloy.

Strike Lip

Basic 7110 strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge.  Where door thickness or jamb shape differs from this standard relationship, extended lip available, specified by last dash number.

Fail Safe/Fail Secure

Field convertible from one mode to the other.  However, AC intermittent solenoid must not be used continuously in either.

Strike Opening

5/8” x 1-7/16” x 1/2” deep.  Bolt retainer jaw is stainless steel.  Strike accepts bolt of any Adams Rite 4500/4700/4900 Series deadlatch or cylindrical latches.

Faceplate

Faceplate for 7110 measures 1-7/16” x 7-15/16”.  For 7111, faceplate is 1-7/16” x 10-1/4”.  

Function

Replaces earlier 002, 7510 or 7810 electric releases in either metal or wooden jambs for remote electrical control of any door equipped with cylindrical latchset or Adams Rite Series 4500/4700/4900 (or similar) deadlatch.  Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself.  Extremely compact mechanism fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”.

Standard Package

Individually boxed with mounting screws, mounting clips and adhesive shims to accommodate jamb or stile extrusion thickness greater or less than normal 1/8”.

Options

Choice of voltage in AC and DC for intermittent or continuous duty.  Specify assembled for either fail-secure (locked when unpowered) or fail-safe (locked when powered) operation, but can be field-converted to the other mode.  Model 7110 and 7111 are identical except for their faceplate length.

4603 Rectifier – Converts AC to DC, installs in low voltage line between transformer and strike.  Rated 2 amps. (200 PIV)

4605 Transformer – Converts 10VAC to 12/24VAC.  Rated 40 Volt-amp output assures plenty of power for strike release.  Patented mounting bracket fits in knockout hole of standard junction boxes.

4606 Transformer – Plug-in version for standard wall outlet.

See catalog for more information on Strike options.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

7110-510-652-00 Adams Rite Electric Strike, 24VDC, 17mA

  • $149.95