*Actual product and finish may vary

Dorma 7436 ARP is a 7400 Series Grade 1 Surface Mounted Adjustable Spring Size (3-6) door closer with Tri-Pak.

ARP — Parallel round form arm complete (Tri-Pack) (0"–4" [0 mm–102 mm]

Packed complete with Parallel, Regular and Top Jamb x SNB1 Mount.

The 7400 Series closers offer modern styling and versatility while providing safe and reliable door control.

Featuring backcheck and adjustable spring sizes, DORMA’s 7400 Series is the ideal solution in a wide variety of applications, including barrier-free. This Grade 1 hydraulic surface door closer is both flexible and easy to install. The 7400 Series offers a compact design and is available in a variety of sprayed finishes to complement any opening’s decor.

Download brochure or get product details for DORMA 7400 series

All DORMA 7400 series closers are shipped standard with SNB1 = Sex Nuts and Machine Screws, 1-3/4"


Technical Details:

• Available as 7414 with adjustable spring sizes 1–4 and 7436 with adjustable spring sizes 3–6.

• 7414 meets 5 lb interior barrier-free applications.

• Non-handed for regular, top jamb and parallel arm applications.

• Quick and easy to install.

• Compact design.

• Two noncritical adjusting valves (sweep and latch) with thermostatic properties work to provide consistent closing speeds under a wide variety of temperatures.

• Adjustable backcheck standard. Provides cushioning when the door is abusively opened.

• Available with optional delayed action to delay door closing from maximum opening. Delay time is adjustable.

• The 7400 Series is certified to the requirements of ANSI/BHMA A156.4 Grade 1.

• Available with optional self-drilling screws for steel door and frame applications (DPK86).

• Available with optional self-tapping screws for aluminum door and frame applications (TPK86).

• BP640C mounting bracket can be used when installing into a 9-1/16" template hole pattern.

Certification:

The DORMA 7400 is listed by U.L. and C.U.L. under their re-inspection programs. Meets the requirements for UL10C and UBC 7.2 (1997) for positive pressure. California State Fire Marshall (CSFM) approved.


In stock options

BP74 — For top jamb mount when overhead ceiling clearance is less than 2-1/4" (57 mm). Can also be used for regular mount to clear a mortised overhead stop/holder.

BP86 — For top jamb mount with slim plastic cover when overhead ceiling clearance is less than 2-1/4" (57 mm). Can also be used for regular mount to clear a mortised overhead stop/holder.

DP74 — For top jamb mount to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4" (44 mm) or more. Permits parallel arm installation with minimum top door rail of 2-1/2" (64 mm) for non-hold open, 2-3/4" (70 mm) for friction hold open applications (assuming 5/8" [16 mm] stop dimension).

DP86 — For top jamb mount with slim plastic cover to clear a surface applied stop/holder. Overhead ceiling clearance must be 1-3/4" (44 mm) or more. Permits parallel arm installation with minimum top door rail of 2-1/2" (64 mm) for non-hold open, 2-3/4" (70 mm) for friction hold open applications (assuming 5/8" [16 mm] stop dimension).

BP640C — For regular, top jamb, or parallel arm mounts. Permits replacement of existing 642–646/641/640 Series closers with 7400 Series closers. Eliminates the need to re-machine the door and frame. Totally concealed when installed. Allows installation of 7400 to retrofit into any closer with a 9-1/16" x 3/4" hole pattern.

COV — Optional slim plastic cover.

FC — Full plastic cover with interchangeable tab.

FCSL — Full plastic slotted cover with interchangeable tab. Mounting holes slotted for low ceiling conditions.

Specification:

All closers shall be DORMA 7400 Series hydraulic surface applied rack and pinion closers. The closer has two independent valves to separately control sweep and latch closing speeds and provide constant speeds when temperatures change. Standard with adjustable backcheck to provide cushioning effect in opening. All 7400 fully adjustable spring force door closers to include an integral design to positively stop adjustment of the spring at the minimum and maximum spring force settings. Standard with special rust inhibitor (SRI) for added protection against corrosive environments.

Optional Specification:

The 7400 Series closer to have delayed action (DA). Delayed action range will be effective from maximum opening to approximately 65°. All 7400 closers to have slim plastic cover (COV) or full plastic cover (FC). Closers to have arm with a selective single point hold open between 80°–170° for regular mount (FH), 70°–175° for parallel arm mount (specify FHP). All closers to have sex nuts with machine screws for 1-3/4" door (SNB1) or 1-3/8" door (SNB2). Closers to have self-drilling screws for steel doors and frames (DPK86). Closers to have self tapping screws for aluminum doors and frames (TPK86). Closers to have TORX security for all exposed fasteners (TX86). All closers to be supplied with BP640C mounting bracket to match a 9-1/16" closer body hole pattern.

7436 ARP Dorma Size (3-6) Parallel Round Form Arm Surface Door Closer

  • Brand: Dorma
  • Product Code: 7436 ARP
  • $125.00


Available Options



Related Products

COV Dorma Slim Plastic Cover

COV Dorma Slim Plastic Cover

The Dorma COV is an Optional Slim Plastic Cover for use with the 7300 and 7400 Series Surface Mounted Door Closers. Download brochure or get pr..

$13.00

DP86 Dorma Drop Plate for Closer w/ Slim Cover

DP86 Dorma Drop Plate for Closer w/ Slim Cover

The Dorma DP86 is a Drop Plate for use with the 7300, 7400 and 8600 Series Surface Mounted Door Closers w/ Slim Cover. Download brochure or get..

$18.00

FC Dorma Full Plastic Cover

FC Dorma Full Plastic Cover

The Dorma FC is an Optional Full Plastic Cover for use with the 7400 Series Surface Mounted Door Closers. Download brochure or get product deta..

$16.00

FCSL Dorma Full Plastic Slotted Cover

FCSL Dorma Full Plastic Slotted Cover

The Dorma FCSL is an Optional Full Plastic Slotted Cover for use with the 7400 Series Surface Mounted Door Closers. Download brochure or get pr..

$16.00

BP74 Dorma Back Plate for Closer w/o Cover

BP74 Dorma Back Plate for Closer w/o Cover

The Dorma BP74 is a Back Plate for use with the 7400 Series Surface Mounted Door Closers w/o Cover. Download brochure or get product details fo..

$18.00

DP74 Dorma Drop Plate for Closer w/o Cover

DP74 Dorma Drop Plate for Closer w/o Cover

The Dorma DP74 is a Drop Plate for use with the 7400 Series Surface Mounted Door Closers w/o Cover. Download brochure or get product details fo..

$18.00

BP640C Dorma Conversion Plate to Retrofit 9-1/16" Hole Spacing

BP640C Dorma Conversion Plate to Retrofit 9-1/16" Hole Spacing

The Dorma BP640C is a Back Plate for use with the 7400 Series Surface Mounted Door Closers. Download brochure or get product details for DORMA ..

$4.00