• HG-305 Markar Hinge Guard - 7' (83-1/8")

*Actual product and finish may vary

The Markar HG-305 7’ Fire-Rated Pin & Barrel Stainless Steel Hinge Guard supports doors weighing up to 600 pounds.

All hinges supplied with standard fasteners.

The 300 Series is manufactured from heavy-duty 14 gauge 304 stainless steel and supports weights up to 600 lbs. A wide variety of configurations are available, including models with Adjust-A-Screw fasteners.

Fire Rating:

• Classified in accordance with UBC standard 7-2 for positive pressure

• 20 minutes – wood doors

• 90 minutes – hollow metal and composite core wood fire doors

• 3 hours – hollow metal doors mounted singly

This is the greatest continuous hinge ever engineered. This unique design answers the problem of adjusting doors where frames are not installed plumb or properly aligned. Not only that, but the wrap-around edge guard protects the door from unsightly dents and gouges and will deflect objects, preventing further damage. Strategically located fasteners coupled with the AdjustaScrew fastener allow the door to be adjusted up to 3/8" within the channel of the hinge and distribute the load of the door down the entire length of the jamb. The proper alignment of the door to the frame will allow your closers, panics, magnetic locks, electronic strikes, and automatic operators to assist you in meeting all your life safety code requirements.

Markar catalog

Material - Heavy-duty 14 Gauge stainless steel

Finishes - US32D Satin Stainless Steel (630)

Cycle Testing - Grade 1, ANSI/BHMA Standard A156.26

Mounting Hardware - No exposed mounting fasteners when closedUniversal screw pack.  AdjustaScrews for correcting frame fit problems up to 3/8".

Capacity - Supports weights up to 600lbs.  4'0" maximum door width.

Sizes - 6'8", 7'0", 7'2", 8'0", 10'0"

Decorative Fastener Covers - Brushed Aluminum

Hole Pattern - Symmetrically template.  Non-handed.

Barrel Type Hinge - 1/4" diameter stainless steel pin.  Long-life split nylon bearings.

Optional Features

Other Features - Custom lengths- specify in inchesCustom hole patternDutch door hinges- suffix hinge “DD”Hospital tips – suffix hinge “HT”Medical BearingsRaised BarrelSpecial sheared leaf.

Fasteners - Tamper-proof security screws.

Electrical Modifications - Exposed switch with adjusting screw – suffix hinge “ES”, Current Transfer Prep - suffix hinge “CTP”, Concealed current transfer – suffix hinge “CE-4D” Concealed current transfer – suffix hinge “CE-8D”.

ElectroLYNX™  - EL-8 (8 wire), EL-12 (12 wire)

HG-305 Markar Hinge Guard - 7' (83-1/8")

  • Brand: Markar
  • Product Code: HG-305-7
  • $381.00


Available Options