• 0600 Rixson 24V - Non-Detector - Pull Side Mount

*Actual product and finish may vary

The Rixson 0600 24V Non-Detector – Pull Side Mount Smoke-Chek V is an Electromechanical Door Holder/Release and Closer.

Cross corridor doors – swinging in the same direction


Maximum door weight 250 lbs.

Doors up to 4'0"

ANSI C00191

Rixson® was the first architectural hardware company to have fire/life-safety closers and holders. It remains an industry leader with several distinctly different holding devices. The Smok-Chek® V Series, the Smok-Chek® VI and the Checkmate® 99 serve many purposes. The models come as detectored with a built in smoke detector or non detectored models which would be connected only to the alarm system. BE ADVISED THAT THESE PRODUCTS ARE NOT DESIGNED TO BE MANUALLY PULLED OUT OF HOLD OPEN. If continual cycling is necessary use a separate switch to release.

Smok-Chek® V

Electromechanical action

• Single-point hold open

• More durable than electrohydraulic units

• To hold open at 90° door must open to 93°

• Best suited for cross corridor doors

Rixson catalog

Product Description & Features

• Pull side mount

• Hold open range 85°- 145°

• Mounts on 2" header

• Adjustable spring surface closer

• Maximum reveal 1/8"

• Concealed switch disconnects hold open

• Sprayed finishes

Technical Information

• 24VAC/DC 80ma

• 120VAC 17ma                                  


Smok-Chek® V

550789 Arm – suffix 550789

For Smok-Chek® V push side units only. This option should be used on double egress with reveals from 3-1/2" to 5-1/2". Should also be used on push side mount where doors need to swing to 180°.  Non-detectored units only.


All units are UL listed

All Rixson® electrified closer/holders are in compliance with ANSI/BHMA 156.8 and A156.15 Standards. See individual products for sub sections.

Limited Warranty

Rixson Electrified Closer/Holders are warranted for 2 years for defect. See Rixson price book for specific details of the limited warranty.


Closer/Holders shall be Smok-Chek® V series. They should be electromechanical type. All holders shall open and hold up to 180º. Units shall have holder on the frame and closer on the door. Product with fall-off will not be acceptable.  Closer/Holders shall be Smok-Chek® VI series. They should be electohydraulic type. Units should have integral smoke detector, where applicable. All models shall have the ability to be set to multiple point hold open in the field. This product should have free swing option.  Whenever floor closers are specified and an electromechanical hold open is needed, the product should be Checkmate® 99. This separate holder will allow the doors to swing to 110º, depending on the type of closer being used. Units should have integral smoke detector, where applicable.




Write a review

Note: HTML is not translated!
    Bad           Good

0600 Rixson 24V - Non-Detector - Pull Side Mount

  • Brand: Rixson
  • Product Code: 0600 24
  • $575.00

Available Options