*Actual product and finish may vary
The LCN 7982 is a Dual-Control Box with built-in air pump and Sequential Timer.
Heavy duty, surface mounted control box contains one or two electrically controlled pneumatic circuits. Air filtration, pneumatic regulation, and system timing is performed by the control box. 7980 series control boxes also contain a built-in air pump to power the system. Each pneumatic circuit can be adjusted for a hold open time up to 30 seconds. Output air pressure can be adjusted to precisely tailor system to individual door requirements.
Pneumatic connections use standard barbed fittings and 925 tubing from the compressor to the control box to the operator. A package of barbed tee and butt connectors are supplied with each control box to simplify installations.
Self-contained control box/compressor combination for independent or simultaneous operation of two door leaves. Two independent pneumatic circuit accepts Normally Open (N.O.) inputs from hardwired or RF (wireless) actuator/receiver combinations. The 7982 control box does not require a separate compressor. Sequential operation (add suffix “S”) is available for 7982 control boxes.
Sequencer Card - 3426
Dual, 0 to 30-second sequence timer module for 7902 and 7982 series control boxes. Can be added to a standard
7902 or 7982 series control box to convert to a sequential operation. Sequencer card, -3426 is included when ordering a 7902S or 7982S series control box.
7982S LCN Dual-Control Box w/ Sequential Timer
- Brand: LCN
- Product Code: 7982S
Tags: control box