• Q27 NHO LAP Rixson 3/4" Offset Hung Single Acting Floor Closer-Body Only, Less All Parts

*Actual product and finish may vary

Complete Premium Door Control.  The 27 Series 3/4” offset hung, single acting floor closers are concealed closers for maximum efficiency, heavy and high traffic openings.  Model Q27 NHO provides a 105° swing and non-hold open arm.  Rixson 27 series

Less all parts, body only

Floor closers provide the best mechanical means to support and control a door. They are designed to work with the laws of physics to provide long-lasting performance and reliability.

Advantages of concealed floor closers

• Aesthetics – let the beauty of the door and its surroundings take center stage

• Vandal resistant – mechanism not exposed

• The solution for arch top doors – offset floor closers

• Both mechanical advantage and aesthetics – a concealed floor closer exclusive

Many different models to choose from

• Use standard product with a top pivot for the best efficiency

• Use a quick install (Q) model to facilitate easy closer removal

• Use extra heavy-duty (L & H) (L-offset) (H-center hung) models for higher traffic/lead lined or extremely heavy doors

• Use model HM with 3/4" offset hinges for hollow metal doors and frames prepared for 4-1/2" hinges

• Closers can be offset hung, center hung or independently hung, single or double acting (center hung only)


27 series catalog


• Single Acting, Handed

• Exterior and Interior Doors

• Weight to 350 lbs.*

• Door Width up to 4'0" (1219mm)

• 1 3/4" Thick Only

Product Description & Features

Surface-attached bottom arm allows closer removal without demounting door

• Q closers have a floor plate (shown).

• For threshold application prefix “QT”

• 3/4" offset only

• Built-in positive dead stop prevents door from swinging beyond the desired opening degree (specify 85°, 90°, 95° or 105°)

• Mortise arm with thru-bolt attachment

• Increased depth of cement case for easy closer removal

• Separate and independent valves for closing speed, latch speed and backcheck

• Available non-hold open (N) or selective hold open (S) at same degree as dead stop

• Delayed action option prefix “DA” (non-hold open closers only)

• Models available to meet ICC/ANSI A117.1 low opening force requirements, prefix “PH”. (For 8-1/2 lbs. of opening force prefix “PH” and suffix “8-1/2 lbs.”)

• Cold weather fluid option specify “CWF” (not available for closers with “DA”)

• Cycolac rustproof cement case

• Vertical door adjustment

• Standard top pivot: #180 included

• One M19 intermediate pivot included.

Note: Closer cannot be ordered without the intermediate pivot

• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot (included). Each additional 30" (762mm) or doors over 195 lbs. warrants another intermediate pivot

• For fire rated openings (up to 3 hour assemblies) prefix F. This package will be supplied with steel top pivot (F180), one intermediate pivot (FM19), and a non-hold open closer

• Fire rated closers cannot have PH option

• For 20-minute labeled doors suffix “-20” to the part number

• Furnished with wood and machine screws

• Extended spindles available in 1/2" increments up to 2" longer than standard


All Rixson® heavy-duty floor closers are in compliance with ANSI/BHMA 156.4 Standards. See individual products for sub sections.

Limited Warranty

Rixson heavy-duty floor closers models 27/28 and 30/40 are warranted for 10 years against defect. The model 20 closer carries a 2 year warranty. See Rixson Price Book for specific details of the limited warranty.


Floor closers shall be heavy-duty model 27 (offset) or model 28 (center hung). All closers shall be handed.  Choose appropriate functions and strengths to accommodate lead lining, extra high traffic, fire rating, independently hung or quick install models. These closers shall have separate and independent checking valves, to control latch speed, closing speed and adjustable hydraulic backcheck. All single acting closers shall have a built in dead stop feature. All closers have one piece spindle assembly. Extra heavy-duty closers shall have minimum of two thrust bearings and one needle bearing.  Closers shall not have compression spring.

Write a review

Note: HTML is not translated!
    Bad           Good

Q27 NHO LAP Rixson 3/4" Offset Hung Single Acting Floor Closer-Body Only, Less All Parts

  • Brand: Rixson
  • Product Code: Q27
  • $662.00

Available Options