• 10SSI BEA SuperScan I, Distance Measuring Active Infrared Sensor

*Actual product and finish may vary

10SSI BEA SuperScan I, Door-mounted presence sensor for swinging and low energy door utilizing distance-measuring technology.

Power Supply: 12 to 24 VAC ± 10% / 12 to 24 VDC + 10%
Current Consumption: Master: On = 60 mA max. / Master: Off = 30 mA max.
Slave: On = 40 mA. Max. / Slave: Off = 30 mA max.
Input Inhibit: 12 to 24 VAC ± 10%: / 12 to 24 VDC + 10% / Inhibited when voltage is applied
SMR Input Data: 12-18 VDC: Inhibited when voltage is applied,
Output Interface; relay: Relay; max. contact rating is 1A @ 30v (resistive)
Detection Range: 0' to 8'
Distance Adjustment: 2’ to 8’ / Rotating cam with linear adjustment
Max. Mounting Height: 8’Detection Time: < 50 ms
Detection Signal Duration: Infinite Presence Detection
Output Hold Time:    Master:  Red LED = Detection   
                                     Green LED = Active Output
                                      Slave:       Red LED = Detection
Operating Temperature Range: -30° F to 140° F
PCB Dimensions:     Master: 10.91" x 1.5"      Slave: 8.75" x 1.5"
Connection to Door Controller: 8 Position Screw Terminal on Master PCB
Connection: Master to Slave: Flat Ribbon Cable With Connectors and Key Lock
Max. Number of Slaves: Standard = 9 / With Monitoring = 8 max.
Functions Selection: Detection Mode - NO or NC. 
                                     Normal Mode or Background Analysis Mode

SuperScan Presence Sensor: SuperScan is a focused active infrared door-mounted presence sensor that provides protection during door travel as follows.

a. SuperScan utilizes a “distance measurement” method of     detection, and is not susceptible to false detections due to changing background environments.
b. Sensor shall be capable to detect humans or equivalent within the detection pattern.
c. Sensor shall be mounted at the top rail of the door(s) – mid-rail mounted (or equivalent) devices shall not be acceptable.
d. Upon detection, the sensor shall provide a relay output to serve as a switch to stop, slow, or reverse the door action.
e. Sensor shall utilize a master and slave module configuration and up to 12 slave modules may be added to accommodate wide doors.
f. SuperScan shall be used in conjunction with BEA’s Bodyguard sensor and Lockout Relay to provide presence detection for the open and closed door positions.
g. Sensor Dimensions: Available in widths from 13 inches (330 mm) to 102 inches (2590 mm) wide by 1.9 inches (48 mm) high by 1.9 inches (48 mm) deep (width to suit door size).
h. Mounting Height: Up to 9 feet (2.74 m) above finished floor
i.  Finish: Black anodized aluminum extrusion with black ABS end-caps.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

10SSI BEA SuperScan I, Distance Measuring Active Infrared Sensor

  • Brand: BEA
  • Product Code: 10SSI
  • $176.00