• SK-910RBQ Seco-Larm ENFORCER Single-Channel RF Receiver

*Actual product and finish may vary

SK-910RBQ Seco-Larm ENFORCER Single-Channel RF Receiver 11~24 VAC/VDC, 315MHz For use to control garage door opener, house lights, alarm control panel, or other devices via remote control.

Be prepared for today's thieves with SECO-LARM's patented CODEBUMP technology. With CODEBUMP, so-called code-grabbers and scanners are rendered obsolete because the RF code changes every time the transmitter button is pressed. In addition, with over 68 billion codes, the chances of ever repeating a code are virtually non-existent. SECO-LARM's ENFORCER CODEBUMP transmitters and receivers are perfect for controlling garage and gate openers, car and home alarms, plus much more.

Seco-Larm RF Receiver Information


    Compatible with all ENFORCER 315MHz transmitters.

    Use to control garage door opener, house lights, alarm control panel, or other devices via remote control.

    Form 'C' type; 10A@24VDC or 120VAC per channel.

    Frequency 315MHz.

    This revolutionary receiver incorp SK-91orates:

    -- 1. Hi-Q SELECTIVITY and a CODING IC for rejecting unwanted RF signals.

    -- 2. HIGHER SENSITIVITY for greater operating distances.

    -- 3. UNSURPASSED ANTENNA MATCHING CAPABILITIES so the receiver is less affected by how and where mounted.

    -- 4. GREATER TUNING STABILITY so the receiver's frequency remains unaffected by shock and vibration.

    LED indicates RF reception, learn mode entered, transmitter learned, memory cleared.

    Mode switch for easy transmitter learning.

    Learns up to 15 transmitters.

    5 Output modes (programmable): 4-Second momentary, 1-Second momentary, Toggle, Validity

    (Validity: receiver outputs for as long as the transmitter button is pressed), Latch.

    Screw terminals for simple connection.


Operating Frequency           315MHz

Operating Voltage                11~24 VAC/VDC

Operating Distance              Up to 500' (150m)*

Operating Temperature       -4º~162º F (-20º~72º C)

Current Draw        8mA@12VDC (standby), 30mA/channel @12VDC (activated).

Sensitivity              -87dBm (typical)

Data Format          PWM

Compatible Transmitters -   68 billion codes SK-919TD1S-UP

RF Channels         One

No. of Stored Transmitter Codes       Up to 15

Receiver Output   Form C dry relay contact (NO/NC/COM); max 10 Amp at 24VDC or 120VAC per channel.

Receiver Output Modes      Programmable 4-sec. momentary (default), 1-sec. momentary, toggle, validity, latch

Connectors           5 Quick-connect screw terminals (+, -, with NO/NC/COM)

Case Construction               High-impact ABS plastic

Size        31/4"x23/4"x11/8" (83x68x28 mm)

Weight    2.6-oz (74g)

Approvals              FCC

Accepts ENFORCER fixed code or CODEBUMP transmitters.

*Actual range will vary greatly depending on the installation and operating environment.


Product Option

SK-91ERSD: Extended range flexible antenna  

Use SK-91ERSD to extend range up to 1000ft (300m)* for these SECO-LARM RF receivers:

SK-910RBQ 1-channel receiver,

Extend range up to 1000ft (300m)* with existing remote.

Easily plugs into a connector on the receiver - no extra wiring needed.

Includes 9-foot cable.

Power supply: +5VDC, +/- 0.1VDC (supplied by receiver).

Current consumption: 4.0mA.

Sensitivity: 0.89mV@-108dBm.

Frequency: 315MHz.

Bandwidth: 3.0MHz (-3dB).

Double-stick mounting tape included.


Write a review

Note: HTML is not translated!
    Bad           Good

SK-910RBQ Seco-Larm ENFORCER Single-Channel RF Receiver

  • $43.00