Key Turn Direction: Clockwise CW Only

Contacts: Maintained in closed position when key is turned.

Switch Configuration: SPST  Single Pole Single Throw

Cylinder: Sold Separately

Note: 650 Series keyswitches operate with either a 1 1⁄8", 1 1⁄4", 1 3⁄8", or 1 1⁄2" cylinder having a straight type cam.

1 1⁄8" mortise cylinder fits direct in key switch - no blocking ring required. 

1 1⁄4" cylinders require a 1⁄8" blocking/spacer ring,

1 3⁄8" mortise cylinder housing for SFIC cores - requires 1⁄4" blocking ring Schlage part number 36-079-025 or equivalent. 

1 1⁄2" mortise cylinder housing for FSIC cores - requires 3⁄8" blocking ring Schlage part number 36-079-037 or equivalent. 

All cylinders, except 1 1⁄4" as CYL or CYL-KA options, must be ordered separately.

Overview

Schlage 650 Series keyswitches utilize an innovative magnetic spring design which allows installers to configure both clockwise and counterclockwise key turn direction as well as momentary or maintained action in seconds. Single gang and narrow stiles are available with numerous options which include heavy-duty plate, weather resistant cover (single gang size only), 2 LED lights – green/red, anti-tamper switch and Schlage Everest cylinder. In addition to the standard (626) satin chrome finish, there are five additional architectural finishes to choose from.

Ordering information

653-04 - SPDT maintained single direction

653-05 - SPDT momentary single direction

653-14 - DPDT maintained single direction

653-15 - DPDT momentary single direction

653-1414 - (2) DPDT maintained bi-direction

653-1415 - DPDT maintained x DPDT momentary

653-1515 - (2) DPDT momentary bi-direction

653-041 - SPDT maintained x key remove one position

653-0404 - (2) SPDT maintained bi-direction

653-0405 - SPDT maintained x SPDT momentary

653-141 - DPDT maintained x key remove one position

653-0505 - (2) SPDT momentary bi-direction

Options

L2 - 2 LEDs green and red, dual voltage

NS - Narrow stile - stainless steel plate (1 3⁄4" x 4 1⁄2")

ATS - Anti-tamper switch

HDP - Heavy-duty plate 1⁄4" thick cast zinc (standard 626 satin chrome finish with anti-tamper plugs)

WP - Weather-resistant cover fits 1 1⁄8" cylinder only (not available with NS and L2 options)