The SARGENT 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Specifications:
For Doors -  1-3/4" (44mm) thick door adjusts to 2" (51mm) standard 1-3/8" (35mm) thick door, 1- Option for Adapter plates
Backsets - 2-3/4" (70mm) backset w/ 1-1/8" front (standard) 2-3/8" (60mm) backset w/ 1" wide front (specify 20-) 3-3/4" (95mm) backset w/ 1-1/8" front (specify 23-) 5" (127mm) backset w/ 1-1/8" Front (specify 25-)
Cylindrical Housing - Steel, zinc dichromate finish
Front - Wrought brass, bronze and stainless steel 2-1/4" (57mm) x 1-1/8" (29mm) Fixed Bevel 2-1/4" (57mm) x 1" (25mm) (included with 20-)
Strike - Wrought brass, bronze and stainless steel 800 curved lip strike – standard 808 curved lip ANSI strike (28- option) Wrought box strike available (WBS- option)
Handing -  All 10 Line Locks are non-handed except for the G & Y Levers
Roses - Heavy wrought brass and bronze
Latch - Stainless steel 1/2" (13mm) throw Brass 3/4" (19mm) throw for pairs of doors (41- option)
Cylinder - Brass, 6 pin, LA keyway standard
Keys - Two, nickel silver
Door Prep - 161
Minimum Stile - 4-1/2" (114mm)

Strength, Durability and Security:
Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements.
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements.
7 YEAR LIMITED WARRANTY - no service required to maintain warranty.